People safety · Manual handling
Bottom of the Pallet
Raise the work rather than bending to it.
The video didn’t load. Please refresh the page and try again.
Read the guide: The Hazardous Manual Tasks Code explained →
Suits: Warehouse and logistics · Retail · Manufacturing
Meet the warehouse crew in this episode →
What happens in this episode
Priya is picking cartons off a pallet on the floor. The first few are easy, but as the stack gets shorter, every pick means a deeper bend. By the bottom layer she’s bending right over for every carton.
The video freezes and asks: how should this be done safely?
Then we see the SafeLee way: rather than chasing the load down, the work comes up to Priya. A forklift sets the pallet on the low beam of the pallet racking, so every pick stays between waist and shoulder height. Priya waits in the marked area, at least three metres clear, until the forklift has backed away, lowered its forks and stopped. Now she keeps each carton close and turns with her feet instead of twisting.
Why it matters
- Body stressing, the strain from lifting, bending, reaching and carrying, is the most common cause of serious workers’ compensation claims in Australia: 51,800 claims, or 35.2%, in Safe Work Australia’s latest national figures.
- A typical serious body stressing claim meant more than nine weeks off work.
- The risk changes during the job. The worst part, the deep bends for the bottom layer, comes at the end, when people are tired and keen to finish.
Source: Safe Work Australia, Key Work Health and Safety Statistics Australia 2026.
Key points
- Watch the whole job, down to the last layer.
- Bring the work up: waist to shoulder height.
- Stay in the marked area, at least three metres clear, until the forklift has stopped.
- Turn with your feet, not your back.
- If there’s still a risk of strain, speak up and reassess the task.
In your version
- Your business’s logo on the opening card and throughout, instead of “Your Business Here”.
- A short quiz after the video. Workers need every answer right for it to count, with as many tries as they need.
- A one-page safe work guide to download, with links to your state’s regulator.
- A record of who watched, when, and how they went, in SafeLee’s built-in training records or your own LMS.
Use it at a toolbox talk
- Play the video (under two minutes).
- At the freeze, ask the crew what should happen, before the video shows them.
- Ask: “Where do we pick off the floor or the bottom of a pallet?” Agree one way to raise the work, such as setting the pallet on a low racking beam, who sets it up, and where people wait while the forklift moves it.
More ideas: toolbox talk topics.
Related guides
Check the rules where you work
Safety laws are similar across Australia, but each state and territory has its own regulator, and Victoria has its own Act. Choose where you work for your regulator’s guidance.
WorkSafe Queensland Queensland
Work Health and Safety Act 2011 (Qld)
SafeWork NSW New South Wales
Work Health and Safety Act 2011 (NSW)
WorkSafe Victoria Victoria
Occupational Health and Safety Act 2004 (Vic): a different law with similar duties. Victoria uses compliance codes rather than the model codes of practice.
SafeWork SA South Australia
Work Health and Safety Act 2012 (SA)
WorkSafe WA Western Australia
Work Health and Safety Act 2020 (WA)
WorkSafe Tasmania Tasmania
Work Health and Safety Act 2012 (Tas)
WorkSafe ACT Australian Capital Territory
Work Health and Safety Act 2011 (ACT)
NT WorkSafe Northern Territory
Work Health and Safety (National Uniform Legislation) Act 2011 (NT)
Comcare Commonwealth
Work Health and Safety Act 2011 (Cth)
Model WHS laws and model codes of practice. A national policy body, not a regulator.
General information only, not legal advice. Safety laws differ between states and territories and change over time. Check the law that applies where you work, follow your site procedures, and talk to your regulator or a WHS professional about your workplace. SafeLee episodes and guides support, and don’t replace, workplace-specific training, supervision and risk assessment.
Sources
- Safe Work Australia, Key Work Health and Safety Statistics Australia 2026 (body stressing, p. 15)
- Safe Work Australia, Model Code of Practice: Hazardous manual tasks
- Safe Work Australia, Model Code of Practice: Managing the risks of plant in the workplace
Model Codes of Practice have legal effect only where adopted in your jurisdiction. Check with your regulator and follow your site procedures.

This video, with your logo.
Every SafeLee episode comes branded for your business, with a quiz, a safe work guide and training records.