People safety · Chemicals and hazardous substances

Dust You Cannot See

Stop the dust at the source, every cut.

1 min 24 s · Subtitles available (press CC) · Demo version

Read the guide: The hierarchy of controls, in plain English →

Suits: Construction

Meet the construction crew in this episode →

What happens in this episode

Alex is cutting concrete pavers dry on a building site, with a grinder and no water, no dust extraction and no respirator. The dust rises round their face, and Lea stops them from outside the barrier.

The video freezes on the hazards, named the way the code of practice does: respirable crystalline silica and inhalation. It asks: Stop Alex. How should this be done safely?

Then we see the SafeLee way: Alex controls the dust at the source with the wet saw, so water catches it right at the blade, and wears the respirator the site’s plan names as well, fitted and checked. The clean-up is with an M- or H-class industrial vacuum or wet methods, never a dry broom.

Why it matters

  • Concrete, brick, block, stone, tile and fibre cement contain crystalline silica. Cutting them makes very fine dust that can be breathed deep into the lungs.
  • Breathing in silica dust can cause silicosis, lung damage that cannot be reversed.
  • Water or on-tool extraction stops most of the dust where it’s made. A fitted respirator is worn as well, not instead.

Source: Safe Work Australia, Model Code of Practice: Managing risks of respirable crystalline silica in the workplace.

Key points

  • Cut wet or use on-tool extraction.
  • Always wear your fitted respirator.
  • Industrial vacuum or wet clean. Never dry sweep.
  • Stop the dust at the source, every cut.

Pairs well with Seal and Check, on fit-checking the respirator.

In your version

  • Your business’s logo on the opening card and throughout, instead of “Your Business Here”.
  • A short quiz after the video. Workers need every answer right for it to count, with as many tries as they need.
  • A one-page safe work guide to download, with links to your state’s regulator.
  • A record of who watched, when, and how they went, in SafeLee’s built-in training records or your own LMS.

Use it at a toolbox talk

  1. Play the video (under two minutes).
  2. At the freeze, ask the crew what should happen, before the video shows them.
  3. Ask: “Which jobs on this site make silica dust, and what control do we use for each one?” Check the wet saw and the extraction are working.

More ideas: toolbox talk topics.

Related guides

Check the rules where you work

Safety laws are similar across Australia, but each state and territory has its own regulator, and Victoria has its own Act. Choose where you work for your regulator’s guidance.

  • WorkSafe Queensland Queensland

    Work Health and Safety Act 2011 (Qld)

  • SafeWork NSW New South Wales

    Work Health and Safety Act 2011 (NSW)

  • WorkSafe Victoria Victoria

    Occupational Health and Safety Act 2004 (Vic): a different law with similar duties. Victoria uses compliance codes rather than the model codes of practice.

  • SafeWork SA South Australia

    Work Health and Safety Act 2012 (SA)

  • WorkSafe WA Western Australia

    Work Health and Safety Act 2020 (WA)

  • WorkSafe Tasmania Tasmania

    Work Health and Safety Act 2012 (Tas)

  • WorkSafe ACT Australian Capital Territory

    Work Health and Safety Act 2011 (ACT)

  • NT WorkSafe Northern Territory

    Work Health and Safety (National Uniform Legislation) Act 2011 (NT)

  • Comcare Commonwealth

    Work Health and Safety Act 2011 (Cth)

  • Safe Work Australia

    Model WHS laws and model codes of practice. A national policy body, not a regulator.

General information only, not legal advice. Safety laws differ between states and territories and change over time. Check the law that applies where you work, follow your site procedures, and talk to your regulator or a WHS professional about your workplace. SafeLee episodes and guides support, and don’t replace, workplace-specific training, supervision and risk assessment.

Sources

  • Safe Work Australia, Model Code of Practice: Managing risks of respirable crystalline silica in the workplace
  • Safe Work Australia, Model Code of Practice: Managing risks of hazardous chemicals in the workplace
  • Model Work Health and Safety Regulations, Chapter 8A (crystalline silica)

This episode is awareness training mapped to the codes of practice, and it names the hazard the way the code of practice does. This awareness training supports, and does not replace, your employer’s risk management process and task-specific training. Model Codes of Practice have legal effect only where adopted in your jurisdiction. Check with your regulator and follow your site procedures.

Lea and Lee, the SafeLee safety characters, in orange hi-vis and hard hats.

This video, with your logo.

Every SafeLee episode comes branded for your business, with a quiz, a safe work guide and training records.