People safety · Chemicals and hazardous substances

Seal and Check

No seal, no protection.

1 min 25 s · Subtitles available (press CC) · Demo version

Read the guide: The hierarchy of controls, in plain English →

Suits: Construction

Meet the construction crew in this episode →

What happens in this episode

Lea’s site plan says a P2 respirator for this cut. She’s pulled it on in a rush, with one strap on and the nose clip flat, and gone straight to the saw. Lee stops her from outside the barrier.

The video freezes on the hazards, named the way the code of practice does: respirable crystalline silica and poor respirator fit. It asks: Stop Lea. How should this be done safely?

Then we see the SafeLee way: Lea takes her hard hat off, puts the top strap high on her head and the bottom strap below her ears, and shapes the nose clip with both hands. She covers the mask and breathes in and out to feel for leaks. A fit check is done every time it goes on. A fit test is different: it’s done by a competent person, and the video doesn’t replace it.

Why it matters

  • A tight-fitting respirator only protects you if it seals to your face. A loose strap, a flat nose clip or stubble under the seal lets dust leak in around the edges.
  • Fine silica dust is hard to see, so a mask that looks fine can still be leaking.
  • A quick fit check every time the respirator goes on is the worker’s part. Fit testing, done by a competent person, is a separate step.

Source: Safe Work Australia, Model Code of Practice: Managing risks of respirable crystalline silica in the workplace.

Key points

  • Both straps on, nose clip shaped.
  • Fit check every time it goes on.
  • If it leaks, adjust and check again.
  • No seal, no protection.

Pairs well with Dust You Cannot See, on controlling the dust at the source.

In your version

  • Your business’s logo on the opening card and throughout, instead of “Your Business Here”.
  • A short quiz after the video. Workers need every answer right for it to count, with as many tries as they need.
  • A one-page safe work guide to download, with links to your state’s regulator.
  • A record of who watched, when, and how they went, in SafeLee’s built-in training records or your own LMS.

Use it at a toolbox talk

  1. Play the video (under two minutes).
  2. At the freeze, ask the crew what should happen, before the video shows them.
  3. Ask: “When did you last fit check your respirator, and what do you do if it still leaks?” Check everyone has the model and size they were fit tested for.

More ideas: toolbox talk topics.

Related guides

Check the rules where you work

Safety laws are similar across Australia, but each state and territory has its own regulator, and Victoria has its own Act. Choose where you work for your regulator’s guidance.

  • WorkSafe Queensland Queensland

    Work Health and Safety Act 2011 (Qld)

  • SafeWork NSW New South Wales

    Work Health and Safety Act 2011 (NSW)

  • WorkSafe Victoria Victoria

    Occupational Health and Safety Act 2004 (Vic): a different law with similar duties. Victoria uses compliance codes rather than the model codes of practice.

  • SafeWork SA South Australia

    Work Health and Safety Act 2012 (SA)

  • WorkSafe WA Western Australia

    Work Health and Safety Act 2020 (WA)

  • WorkSafe Tasmania Tasmania

    Work Health and Safety Act 2012 (Tas)

  • WorkSafe ACT Australian Capital Territory

    Work Health and Safety Act 2011 (ACT)

  • NT WorkSafe Northern Territory

    Work Health and Safety (National Uniform Legislation) Act 2011 (NT)

  • Comcare Commonwealth

    Work Health and Safety Act 2011 (Cth)

  • Safe Work Australia

    Model WHS laws and model codes of practice. A national policy body, not a regulator.

General information only, not legal advice. Safety laws differ between states and territories and change over time. Check the law that applies where you work, follow your site procedures, and talk to your regulator or a WHS professional about your workplace. SafeLee episodes and guides support, and don’t replace, workplace-specific training, supervision and risk assessment.

Sources

  • Safe Work Australia, Model Code of Practice: Managing risks of respirable crystalline silica in the workplace
  • Safe Work Australia, Model Code of Practice: Managing risks of hazardous chemicals in the workplace
  • Model Work Health and Safety Regulations, regulations 44 and 46 (personal protective equipment)

This episode is awareness training mapped to the codes of practice, and it names the hazard the way the code of practice does. This awareness training supports, and does not replace, your employer’s risk management process and task-specific training. Model Codes of Practice have legal effect only where adopted in your jurisdiction. Check with your regulator and follow your site procedures.

Lea and Lee, the SafeLee safety characters, in orange hi-vis and hard hats.

This video, with your logo.

Every SafeLee episode comes branded for your business, with a quiz, a safe work guide and training records.